Central Florida Clean completed detailed post-remodel cleaning for a commercial wellness studio in Longwood, Florida, including construction dust removal, LVP floor detailing, paint-splatter removal, restroom cleaning, interior glass, and final preparation before the renovated space was furnished and put into use.
This project involved final cleaning after an interior commercial build-out that transformed the space into a wellness studio with treatment rooms and a rear area used primarily for Pilates, along with yoga and other wellness activities.
The original project quote documented approximately 197 sq ft of hallway, 229 sq ft in the front room, 209 sq ft in the second room, and 430 sq ft in the third room, in addition to the restroom and front glass area.
The interior had been gutted and remodeled before Central Florida Clean arrived. The work included new LVP flooring, fresh paint, new doors, a remodeled restroom, windows, and decorative/acoustical wall treatments in the rear wellness area.
By the time cleaning began, the space was in fair post-remodel condition. It was not heavily filled with construction waste, but there were still tools, paper, packaging, scattered heavier debris, construction dust, paint splatter, and residue that needed to be removed before the new finishes could be properly presented.
The project did not require major demolition debris removal. Once the remaining loose material and trade waste were consolidated, the heavier debris fit into roughly half of a standard contractor bag. The more time-consuming work was the detailed cleaning required across newly finished surfaces.
Dust and light construction residue were present across floors, edges, rooms, fixtures, and other finished surfaces.
Fine paint spots were spread throughout sections of the new flooring, requiring detailed inspection and repeated spot removal.
The remodeled interior was inside an older commercial building, so some window-frame buildup predated the renovation and required additional detailing.
The new finishes needed to look clean and complete before the studio could be furnished, reviewed, and placed into use.
The cleaning scope covered the hallway, front room, two additional rooms, restroom, front glass area, walls, floors, and final detailing throughout the studio.
The most time-intensive part of the project was not one large paint spill. It was the amount of small paint splatter spread throughout sections of the studio. Because the spots were minor but dispersed, the floor required repeated inspection, spot removal, vacuuming, and detailed cleaning before the finished surface could be properly presented.
This project is a good example of why post-construction cleaning should not be priced by square footage or debris volume alone. The heavier loose debris was relatively limited, but the final clean still required approximately 10 hours because small paint splatter was spread across new LVP flooring and older window frames required additional detailing.
Finish condition, residue, glass, flooring, pre-existing buildup, and the amount of detailed surface work can have more impact on labor than the amount of loose construction waste.
The project was completed using a combination of commercial vacuuming, floor equipment, microfiber systems, hand tools, and detail-cleaning supplies. Equipment and tools included a Shop-Vac, an Oreck floor machine/buffer, microfiber mops, putty knives for careful spot removal, cleaning chemicals, and standard detailing supplies.
Because newly installed surfaces can be damaged by aggressive cleaning, paint and residue removal required attention to the flooring and surrounding finishes rather than a one-method-fits-all approach.
One useful lesson from this project was that post-construction cleaning does not always mean every condition in the building was created by construction. The interior had been remodeled, but parts of the building, including some window frames, were older and had accumulated buildup that predated the renovation.
That older buildup, combined with construction residue and paint splatter, made portions of the interior glass and window-frame detailing more time-consuming than the newly installed surfaces. It reinforced the importance of evaluating both current construction residue and pre-existing conditions when reviewing a final-clean scope.
Once the remaining materials and construction debris were removed, the studio received detailed floor, surface, restroom and interior cleaning so the remodeled space could move into its final setup stage.
After approximately 10 hours of detailed cleaning, the remodeled wellness studio was left substantially cleaner and ready for the next stage of setup. The new LVP flooring became one of the most noticeable parts of the finished space after construction dust, paint splatter, and residue were removed.
The completed work received a positive response from the people reviewing the property, with the condition of the floors standing out in particular. For Central Florida Clean, the project also became an important early post-construction cleaning experience that helped refine how final-clean scopes, surfaces, and detailing requirements are evaluated.
The scope included construction dust and debris removal, LVP floor cleaning and edge detailing, paint and residue spot removal, interior window cleaning, wall spot cleaning, deep restroom cleaning, room and hallway detailing, and a final walkthrough.
The floor was first cleared of loose debris and vacuumed. Small paint spots and adhered residue were then identified and carefully removed with hand tools where appropriate for the surface. The floor was vacuumed again and completed with detailed floor cleaning and edge work.
The project was completed by one cleaner in approximately 10 hours. The most time-consuming portions were the widespread fine paint splatter on the new flooring and detailed cleaning around older interior windows and frames.
A renovated space can contain both new construction residue and pre-existing buildup. Older frames, glass, fixtures, and other surfaces may require additional detailing that is separate from the dust, paint, and debris created by the remodel itself.
Square footage is useful for early budgeting, but it does not show how much detailed labor a project may require. At this Longwood studio, the loose debris volume was modest, while widespread fine paint splatter and older window-frame buildup became some of the most time-consuming work. For broader budgeting guidance, see our Orlando post-construction cleaning cost guide.
Yes. Central Florida Clean provides commercial post-construction cleaning for projects throughout Central Florida, including Orlando and surrounding communities, depending on the project location, size, schedule, access, and scope.
Send the project location, approximate square footage, schedule, plans, photos, or scope of work. Central Florida Clean can review the details and recommend the most appropriate next step.
