Rough Clean
Usually performed while construction is still progressing or before final finish work. The focus is on loose debris, heavy dust, sweeping, vacuuming, and preparing the space for subsequent work.
Post construction cleaning cost Orlando estimates are commonly based on square footage, cleaning phase, site condition, finish level, access, and the amount of detail required. Commercial build-outs and newly constructed homes can use similar estimating methods, but the final price can vary substantially even when two projects have the same square footage.
Current published 2026 pricing guides commonly place post-construction cleaning around $0.10–$0.30 per square foot for rough cleaning, $0.30–$0.75 per square foot for detailed final cleaning, and about $0.10–$0.20 per square foot for touch-up cleaning. These are just starting points and are VERY BROAD budgeting ranges, not a Central Florida Clean price sheet.
The table below is intended for early budgeting. Actual quotes should be based on the project scope and site conditions rather than just the square footage alone.
| Cleaning Phase | Broad Budget Range | Typical Purpose |
|---|---|---|
| Rough Clean | $0.10–$0.30 / sq ft | Loose debris, sweeping, vacuuming, heavy dust and preparation for later phases |
| Final Clean | $0.30–$0.75 / sq ft | Detailed turnover cleaning of finished surfaces before occupancy, walkthrough or opening |
| Touch-Up Clean | $0.10–$0.20 / sq ft | Presentation cleaning after punch-list activity, inspections or additional dust settles |
These planning ranges are consistent with current published pricing guidance, including Angi’s 2026 Orlando post-construction cleaning cost guide and other current market references. Central Florida Clean quotes projects individually after reviewing scope, conditions, finishes, schedule, access, and mobilization requirements.
Not every construction project requires all three phases. The proposal should identify exactly which mobilizations are included.
Usually performed while construction is still progressing or before final finish work. The focus is on loose debris, heavy dust, sweeping, vacuuming, and preparing the space for subsequent work.
Performed when construction is substantially complete. This is the detailed pass involving finished surfaces, fixtures, restrooms, kitchens, glass, flooring, trim, remaining dust, and agreed light construction residue.
Used after punch-list activity, walkthroughs, inspections, or final trades create additional dust, smudges, footprints, or presentation issues before turnover.
Central Florida Clean focuses on construction-related cleaning rather than routine residential housekeeping. Pricing methods such as square-foot budgeting, project-based quoting, phase pricing, and detailed scope review can apply to both commercial projects and newly constructed homes.
Offices, retail, medical, wellness, industrial, tenant improvement, and other commercial construction projects.
Commercial Post-Construction Cleaning → BuildersSingle homes, custom homes, phased communities, residential developments, and recurring builder turnovers.
Builder Cleaning Services →Square footage is useful for establishing a starting budget, but it does not measure everything a cleaner must actually touch, detail, scrape, vacuum, wipe, polish, or protect.
One Central Florida Clean restroom turnover illustrates why project complexity matters more than floor area alone. The space was small, but polished black floor tile, dark sinks and fixtures, mirrors, wall tile, grout lines, and high-reflectivity finishes made fingerprints, haze, dust, streaking, and residue especially visible.
Standard final cleaning and corrective trade cleanup are not always the same thing. Heavy grout haze, cured paint, adhesive, mortar, silicone, or excessive trade residue should be identified during estimating and may require separate pricing or a change order.
Trade cleanup, drywall dust, remaining materials, debris, and whether other trades are still working can dramatically change labor.
A rough clean, final clean, and touch-up are three separate visits. Per-square-foot pricing should not be interpreted as an all-phases total unless the proposal says so.
Polished tile, millwork, specialty finishes, cabinetry, detailed fixtures, and high-visibility surfaces can require much more time per square foot.
Storefronts, interior partitions, mirrors, windows, frames, stickers, and pre-existing buildup can add substantial detail labor.
LVP, VCT, polished concrete, carpet, tile, grout, adhesive, paint residue, and protective coverings require different methods and time.
High dusting, exposed structures, tall glass, lifts, restricted access, occupied areas, and difficult staging can affect production.
Overnight work, weekend mobilization, rush deadlines, hard opening dates, closings, and work around active trades can change labor planning.
Routine bagged cleaning waste is very different from bulk construction debris, dumpster loading, hauling, or disposal of trade materials.
Casselberry, Florida
During an office and warehouse turnover project, late trade activity tracked mud and dirty buildup onto newly installed VCT. Paint splatter, hardened residue, and the contaminated floor condition required more detailed cleaning than the original site condition suggested.
The lesson is not that every contaminated floor produces the same time increase. It is that condition at mobilization can matter more than the stated square footage, and unexpected corrective work should be documented.
View the Casselberry Office & Warehouse Project →Using a broad $0.30–$0.75 per-square-foot final-clean range, these examples show why square footage can be useful for early budgeting. They are not Central Florida Clean quotes.
Example new home, small office, retail suite, or similar project.
Illustrative range before finish complexity and site condition are considered.
Could vary greatly between an open space and a highly detailed build-out.
Larger commercial project before additional phases, specialty work, or access costs.
Actual project pricing can fall below or above illustrative ranges depending on scope, market conditions, floor plan, finish package, site condition, cleaning phase, access, schedule, and corrective work requirements.
A builder managing multiple similar homes may be able to develop a more repeatable cleaning program than a one-time project. Consistent floor plans, finish packages, access procedures, site expectations, and turnover schedules can improve estimating and operational predictability.
Volume does not automatically mean every home will cost the same. Variations in site condition, upgrades, windows, bathrooms, cabinetry, corrective residue, and schedule should still be documented.
New Construction Home Cleaning for Builders →A useful estimate looks beyond the building's total square footage and evaluates what is actually inside the space, what condition it is in, and what the turnover standard requires.
Measure and confirm the space. Review square footage, floor plans, rooms, wall areas, and unusual dimensions where they affect scope.
Identify surfaces and finishes. Flooring, cabinetry, glass, tile, fixtures, millwork and specialty finishes change cleaning methods.
Inspect construction residue. Determine whether the condition is normal final-clean soil or corrective trade residue.
Confirm responsibilities. Clarify debris, dumpsters, utilities, access, security, lifts, water, power and other site logistics.
Confirm schedule and phases. Define rough, final, touch-up, overnight, weekend, turnover and remobilization requirements.
In a Longwood wellness-studio build-out, the overall loose debris load was relatively modest, but small paint splatter distributed across new LVP flooring became one of the most time-consuming parts of the final clean. It is a useful example of why low debris does not always mean low labor.
View the Longwood Post-Construction Project →Detailed residue removal, windows, high-visibility finishes, surface protection, and repeated inspection can consume more labor than the amount of loose debris suggests.
Explore the Project Portfolio →For broad 2026 budgeting, published pricing guides commonly show rough cleaning around $0.10–$0.30 per square foot, detailed final cleaning around $0.30–$0.75 per square foot, and touch-up cleaning around $0.10–$0.20 per square foot. Actual Orlando project quotes depend on scope, finishes, condition, access, schedule, and cleaning phase.
Not automatically. Commercial and newly constructed residential projects can overlap significantly in cleaning methods. The more important pricing factors are detail level, number of rooms, bathrooms, cabinetry, glass, finish package, site condition, floor type, project phase, access, and turnover requirements.
Small rooms can contain many high-detail surfaces within very little floor area. Tile, grout, mirrors, sinks, fixtures, partitions, glass, and polished finishes may require far more detailing per square foot than a large open floor.
Light residue may be addressed when included in the agreed scope, but significant grout haze is often corrective trade cleanup rather than ordinary final cleaning. It can require additional labor, specialized chemistry, testing, and separate pricing or a change order.
No. Some projects require all three phases while others need only a final clean or a final plus touch-up. Each mobilization should be identified in the proposal so the buyer knows exactly what is included.
Yes. Central Florida Clean can review recurring builder opportunities involving multiple homes, repeated floor plans, phased communities, or scheduled turnovers. A repeatable scope can be developed after project requirements and initial site conditions are reviewed.
Provide square footage or plans, the scope, current site photos, floor and finish information, glass requirements, target completion date, working hours, access conditions, utility availability, debris responsibilities, and the cleaning phases required. A walkthrough is especially helpful when finish complexity or construction residue may affect labor.
Central Florida Clean can review commercial construction, renovations, individual new homes, or recurring builder projects throughout Orlando and Central Florida.